TAN COMPUTER SYSTEM

OKSORI CD-VISION PRO BOARD

Category                   MPEG 1 card
Video Types Supported      XVGA
Video Processor            Unidenitifed
Highest Resolution         640 x 480
Supported
Data Bus Type              16-bit ISA
Memory Type                N/A
Maximum Onboard Memory     N/A

[Image]

                                CONNECTIONS

        Purpose           Location           Purpose           Location

  15-pin analog video        CN1        9-pin NTSC Option        CN7
  port                                  board connector

  VGA feature                CN2        9-pin NTSC Option        CN8
  connector                             board connector

  Internal audio out         CN3        4-pin NTSC Option        CN9
                                        board connector

  *Proprietary serial        CN4        External line out         J1
  A/V interface

  6-pin NTSC Option          CN5        *NTSC out                 J2
  board connector

  9-pin NTSC Option          CN6        *NTSC out                 J3
  board connector

       *Note: J2 & J3 are only used when the NTSC Option board is
       connected. CN4 is only used when the CD-Vision Option board is
       connected.

                           DMA CHANNEL SELECTION

    Channel         JP2/A          JP2/B         JP2/C          JP2/D

  »       0         Closed        Closed          Open           Open

          3          Open          Open          Closed         Closed

                            INTERRUPT SELECTION

        IRQ               JP2/E             JP2/F             JP2/G

  »        5             Closed             Open               Open

           10             Open             Closed              Open

           12             Open              Open              Closed

                       OVERLAY I/O ADDRESS SELECTION

                Address                               JPS1

  »                210h                               Open

                   310h                              Closed

                      CD VISION I/O ADDRESS SELECTION

  Note: The exact address setting(s) of JPS2 is unidentified by the
  manufacturer.

  FACTORY CONFIGURED - DO NOT ALTER

      Jumper            Position

        J4                 N/A